LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Left Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Position the seat belt buckle to the seat.
  2. Install the seat belt buckle bolt (1).

    Tighten:  Tighten the bolt to 34 N.m (25 lb ft).

    Fig 1: Identifying Seat Belt Buckle Bolt (Left Front)
    GM165417Courtesy of GENERAL MOTORS CORP.
  3. Connect the seat belt buckle electrical connector.
  4. Install the front bucket seat. Refer to Seat Replacement in Seats.
  5. Enable the SIR system, if equipped with SIAB. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.