LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Seat Belt System) >> Repair Instructions >> Bracket Replacement - Child Seat Belt Restraint System >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the bracket (1) in the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the child seat latch bracket bolts (2).

    Tighten:  Tighten the bolts to 26 N.m (19 lb ft).

    Fig 1: View Of Child Seat Belt Latch Bracket
    GM834570Courtesy of GENERAL MOTORS CORP.
  3. Install the split folding rear seat back. Refer to Seat Back Replacement - Rear Split Folding in Seats.
  4. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.