LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Stem Oil Seal and Valve Spring Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the J 36017  install the valve seal.
    Fig 1: View Of J 36017 & Valve Seal
    GM758364Courtesy of GENERAL MOTORS CORP.
  2. Install the valve spring.
  3. Compress the valve spring.
  4. Install the valve spring keepers.
  5. Remove the air hose adaptor into the spark plug hole.
    Fig 2: View Of Air Hose Adaptor
    GM758363Courtesy of GENERAL MOTORS CORP.
  6. Remove the J 43649  from the cylinder head.
    Fig 3: View Of Valve Spring Compressor
    GM758361Courtesy of GENERAL MOTORS CORP.
  7. Install the spark plugs. Refer to Spark Plug Replacement in Engine Controls - 2.2L (L61).
  8. Install the camshaft roller followers.
    Fig 4: Identifying Camshaft Roller Followers
    GM758358Courtesy of GENERAL MOTORS CORP.
  9. Install the camshaft. Refer to Intake Camshaft and Lifter Replacement  or Exhaust Camshaft and Lifter Replacement .
scientia non olet · About LEMON Manuals