LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine mount strut.
    Fig 1: Engine Mount Strut Exploded View
    GM60247Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the engine mount strut bolts.

    Tighten:  Tighten the engine mount strut bolts to 100 N.m (74 lb ft) + 90 degrees.

  3. Install the right engine splash shield. Refer to Splash Shield Replacement - Engine in Body Front End.
  4. Lower the vehicle.