LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the engine mount strut bracket and the bolts.
    Fig 1: Engine Mount Strut Exploded View
    GM60247Courtesy of GENERAL MOTORS CORP.

    Tighten:  Tighten the engine mount strut bracket bolts to 66 N.m (49 lb ft).

  2. Install the engine mount strut. Refer to Engine Mount Strut Replacement .
  3. Install the right engine splash shield. Refer to Splash Shield Replacement - Engine in Body Front End.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals