Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lower bolt into the bracket.
- Install the bracket (2) to the engine and hand tighten the lower bolt.
NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the upper bracket bolts (1).
Tighten: Tighten all the bolts to 100 N.m (74 lb ft).
- Install the engine mount. Refer to Engine Mount Replacement .