LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Water Pump Removal

Water Pump Removal

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine coolant temperature sensor.
    Fig 1: View Of Engine Coolant Temperature Sensor
    GM746068Courtesy of GENERAL MOTORS CORP.
  2. Remove the water pipe support bracket and bolts.
    Fig 2: View Of Water Pipe Support Bracket
    GM856306Courtesy of GENERAL MOTORS CORP.
  3. Remove the thermostat and water feed pipe retaining bolts.
    Fig 3: View Of Thermostat & Water Feed Pipe Retaining Bolts
    GM746070Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Twist the water feed pipe while pulling to remove it from the water pump cover.
  4. Remove the thermostat housing and water feed pipe from the water pump cover.
  5. Remove the water pump retaining bolts. Be sure to remove the bolt that goes through the front of the engine block.
  6. Remove the water pump assembly.
    Fig 4: View Of Water Pump Assembly
    GM412423Courtesy of GENERAL MOTORS CORP.