LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Roof Weld Joint Reveal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a flat bladed tool to lift the roof weld joint reveal molding (1) upward.
    Fig 1: Identifying Roof Weld Joint Reveal Molding
    GM740890Courtesy of GENERAL MOTORS CORP.
  2. Remove the roof weld joint molding from the roof.
  3. Clean the weld joint with a 3M™ Scotch Brite adhesive remover disk P/N 07501 or equivalent.
scientia non olet · About LEMON Manuals