LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Rocker Panel >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the rocker panel molding screws.
  3. Use the J 38778  to release the rocker panel retainers. See Special Tools and Equipment .
    4. Fig 1: Removing Rocker Panel Molding Screws
    GM827677Courtesy of GENERAL MOTORS CORP.
  4. Remove the rocker panel molding from the rocker.
scientia non olet · About LEMON Manuals