Rear Hoist Pads
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The rear hoist pads must not contact the rocker panels to the outside of the frame rail shipping slot reinforcements.
IMPORTANT:
The rear hoist pads must not contact the floor pan.
Position the frame contact rear hoist pads as follows:
- Under the rear frame rail shipping slot reinforcements.
- The long sides of the pads perpendicular to the frame rails.
- The outer edge of the pads aligned with the outer edge of the rear frame rail shipping slot reinforcements.