Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the hub and bearing assembly. Refer to Wheel Bearing/Hub Replacement - Front .
- Remove the wheel stud (1) from the hub and bearing assembly (2) using the J 43631 .
- Discard the stud.