Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the following components:
- The spacer (4)
- The insulator (5)
- The stabilizer (6)
NOTE: Refer to FASTENER NOTICE in Cautions and Notices. - Install the stabilizer link nut (3) attaching the stabilizer link to the stabilizer link bolt (6).
Tighten: Tighten the nut until the nut meets the end of the bolt threads for torque value. Tighten the nut to 17 N.m (13 lb ft).
- Lower the vehicle.