LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Front Suspension System) >> Repair Instructions >> Front Suspension Support Brace Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front suspension support brace (3) to the vehicle.
    Fig 1: Identifying Front Suspension Support Brace
    GM490133Courtesy of GENERAL MOTORS CORP.
  2. Install the bolt (4) to the suspension support brace (3) and lower the tie bar (5).

    Hand tighten the bolt.

    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the bolt (4) to the front suspension support brace (3) and the front suspension crossmember (1).

    Tighten:  Tighten the bolts to 72 N.m (53 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals