LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Bumper System) >> Repair Instructions >> Impact Bar Replacement - Front Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front bumper impact bar.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
    Fig 1: Installing Front Bumper Impact Bar Nuts
    GM869151Courtesy of GENERAL MOTORS CORP.
  2. Install the nuts to the front bumper impact bar.

    Tighten:  Tighten the front bumper impact bar nuts to 150 N.m (111 lb ft).

  3. Install the wiring harness and the components to the impact beam.
  4. Install the front fascia. Refer to Fascia Replacement - Front Bumper (Chevrolet)  or Fascia Replacement - Front Bumper (Pontiac) .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals