LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Front (Pontiac) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the energy absorber into the front fascia.
  2. Install the fasteners that attach the energy absorber to the fascia.
    Fig 1: Installing Energy Absorber To Fascia Fasteners (Pontiac)
    GM882546Courtesy of GENERAL MOTORS CORP.
  3. Install the Pontiac emblem to the center of the front fascia. Refer to Emblem Replacement - Front Bumper Fascia .
    Fig 2: Installing Pontiac Emblem (Pontiac)
    GM320041Courtesy of GENERAL MOTORS CORP.
  4. Install the front fascia. Refer to Fascia Replacement - Front Bumper (Chevrolet)  or Fascia Replacement - Front Bumper (Pontiac) .
scientia non olet · About LEMON Manuals