LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Body Front End) >> Repair Instructions >> Hood Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
  1. Open and support the hood.
  2. Install a protective covering over the fenders.
  3. Remove the hood insulator, if equipped. Refer to Hood Insulator Replacement .
  4. Remove the hood latch striker. Refer to Hood Latch Striker Replacement .
  5. Mark the upper hood hinge location to the hood with a grease pencil.
  6. With the aid of an assistant, remove the bolts which secure the hood hinge to the hood.
    Fig 1: Removing Hood Hinge Bolts
    GM317815Courtesy of GENERAL MOTORS CORP.
  7. With the aid of an assistant, remove the hood.
scientia non olet · About LEMON Manuals