LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Hydraulic Brake System) >> Repair Instructions >> Master Cylinder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the electrical connector (3) from the brake fluid level sensor.
  2. Disconnect the brake pipes (4) from the master cylinder (1).
  3. Cap the open brake pipes (4) to prevent brake fluid loss and contamination.
  4. Remove the master cylinder mounting nuts (2).
  5. Move the proportioning valve assembly bracket or the antilock brake modulator bracket forward, just enough to clear the studs on the brake booster.
  6. Remove the master cylinder (1) from the booster (5).
    Fig 1: Disconnecting Brake Fluid Level Sensor Electrical Connector
    GM569877Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals