LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Hydraulic Brake System) >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the electrical connector (3) from the brake fluid level sensor.
    Fig 1: Disconnecting Brake Fluid Level Sensor Electrical Connector
    GM569877Courtesy of GENERAL MOTORS CORP.
  2. Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor (1), and press the sensor through the reservoir (2) to remove.
    Fig 2: View Of Brake Fluid Level Sensor
    GM165377Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals