LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Hydraulic Brake System) >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake fluid level sensor to the master cylinder reservoir.

    Press the sensor into place to secure the sensor retaining tabs.

  2. Connect the electrical connector (3) to the brake fluid level sensor.
    Fig 1: Connecting Brake Fluid Level Sensor Electrical Connector
    GM569877Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals