LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (HVAC Systems - Manual) >> Repair Instructions >> Temperature Control Cable Replacement (Chevrolet) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Pontiac) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Chevrolet) in Instrument Panel, Gages and Console.
  2. Disconnect the temperature control cable from the temperature door lever.
    Fig 1: Identifying Temperature Control Cable
    GM864482Courtesy of GENERAL MOTORS CORP.
  3. Remove the cable flag retaining screw.
  4. Remove the HVAC control assembly. Refer to HVAC Control Assembly Replacement (Chevrolet)  or HVAC Control Assembly Replacement (Pontiac) .
  5. Use the tab to release the flag from the HVAC control assembly.
    Fig 2: Locating HVAC Control Assembly Tab
    GM864491Courtesy of GENERAL MOTORS CORP.
  6. Remove the temperature control cable.