LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (HVAC Systems - Manual) >> Repair Instructions >> Mode Control Cable Replacement (Pontiac) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the temperature control cable to the HVAC control assembly.
    Fig 1: Locating Temperature Control Cable Flag Tab
    GM864491Courtesy of GENERAL MOTORS CORP.
  2. Snap the flag into the mode base.
  3. Snap the cable end form over the lever post.
  4. Install the HVAC control assembly.
  5. Install the cable to the mode door lever/cam.
    Fig 2: View Of Mode Control Cable
    GM864456Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  6. Install the cable flag and screw to the HVAC module assembly.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  7. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement (Chevrolet) or Instrument Panel (I/P) Carrier Replacement (Pontiac) in Instrument Panel, Gages and Console.