HVAC Control Assembly
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
The HVAC control assembly is a non-class 2 device that interfaces between the operator and the HVAC system to maintain air temperature and distribution settings. The battery positive and ignition 3 voltage circuits provide power to the control assembly. The temperature and mode doors are controlled by cables. The control assembly supports the following features:
Air Temperature Description and Operation
| Feature | Availability |
|---|---|
| Afterblow | No |
| Purge | No |
| Personalization | No |
| Actuator Calibration | No |