LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Antilock Brake System And Traction Control System) >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the BPMV bracket into position in the vehicle.
    Fig 1: View Of BPMV Bracket
    GM1311227Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the master cylinder mounting nuts.

    Tighten:  Tighten the nuts to 27 N.m (20 lb ft).

  3. Install the EBCM/BPMV assembly to the mounting bracket.
    Fig 2: View Of EBCM/BPMV Assembly Mounting Bracket
    GM1311226Courtesy of GENERAL MOTORS CORP.
  4. Install the EBCM/BPMV assembly to mounting bracket bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals