Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Position the front seat pad and cover (1) to the front seat cushion frame (3).
- Connect the front seat pad and cover J-hook retainers (2) to the front seat cushion frame (3).
- Install the front bucket seat back to the front seat cushion. Refer to Seat Back Replacement - Front .
- Install the front bucket seat. Refer to Seat Replacement .
- Enable the SIR system, if equipped with SIAB. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.