LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Seat System) >> Repair Instructions >> Seat Back Release Latch Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear compartment lid.
  2. With a small flat-bladed tool release the retaining tabs for the seat back release handles.
    Fig 1: Disconnecting Seat Back Release Handle Retaining Tabs - Rear
    GM740617Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear window panel trim. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
  4. Remove the GSP sensor from the rear shelf, if equipped. Refer to Navigation Antenna Replacement .
  5. Remove the seat back release handles from the rear package shelf.
    Fig 2: Removing GSP Sensor - Rear
    GM740621Courtesy of GENERAL MOTORS CORP.
  6. Remove the seat back latch bolts from the latch.
  7. Remove the seat back latch from the rear package shelf.
    Fig 3: Removing Seat Back Latch Bolts - Rear
    GM801151Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals