LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Seat System) >> Repair Instructions >> Seat Back Latch Striker Replacement - Rear Folding >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the latch striker (3) to the seat back frame (1).
  2. Install the rivets (2) to the latch striker (3). Use a rivet gun to attach the latch striker (3) to the seat back frame (1).
  3. Adjust the seat back cover and the pad to the desired appearance. Refer to Seat Back Cover and Pad - Rear Split Folding .
  4. Install the rear seat back. Refer to Seat Back Replacement - Rear Split Folding .
    Fig 1: Identifying Seat Back Latch Striker - Rear Folding
    GM834297Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals