Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Pull the bottom of the seat back cover assembly (2) down and over the frame (11).
- Connect the J-hook retainer (1).
- Install the release lever knob (5) to the recliner (8), if equipped.
- Install the head restraint. Refer to Head Restraint Replacement - Front Seat .
- Install the front bucket seat back. Refer to Seat Back Replacement - Front .
- Reposition the front seat back to the original position.