LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Seat System) >> Repair Instructions >> Seat Back Cover Replacement - Front (With AJ7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the bottom of the seat back cover assembly (2) down and over the frame (7).
  2. Fasten the J-hook retainer (1) located on the bottom of the seat back.
  3. If equipped, install the recliner release lever knob (8) to the recliner (11).
    Fig 1: Installing Recliner Release Lever Knob (With AJ7)
    GM873909Courtesy of GENERAL MOTORS CORP.
  4. Install the Side Impact Air Bag (SIAB) module. Refer to Inflatable Restraint Side Impact Module Replacement - Front in SIR.
  5. Install the seat back to the seat cushion frame. Refer to Seat Back Replacement - Front .
  6. Install the head restraint to the seat back. Refer to Head Restraint Replacement - Front Seat .
  7. Enable the SIR system. Refer toSIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.