LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pressure relief valve (1) by sliding the valve into the opening and engaging the tabs.
    Fig 1: Installing Quarter Outer Panel Pressure Relief Valve
    GM276546Courtesy of GENERAL MOTORS CORP.

    Fully engage the retaining tabs.

  2. Install the rear compartment trim.
  3. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Chevrolet) or Fascia Replacement - Rear Bumper (Pontiac) .
scientia non olet · About LEMON Manuals