LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Rear Compartment Lid >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the compartment lid hinge (4).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing Compartment Lid Hinge Bolts
    GM284020Courtesy of GENERAL MOTORS CORP.
  2. Install the hinge bolts (3) to the rear window panel.

    Tighten:  Tighten the rear compartment hinge to rear window panel bolt to 10 N.m (89 lb in).

  3. Install the rear panel window trim. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
  4. Install the compartment lid torque rods. Refer to Torque Rod Replacement - Rear Compartment Lid .
  5. Install the compartment lid. Refer to Compartment Lid Replacement - Rear .
  6. Install the wire harness rosebuds to the hinge arm.
  7. Adjust the compartment lid. Refer to Compartment Lid Adjustment - Rear .
scientia non olet · About LEMON Manuals