LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
  2. Remove the instrument panel (I/P) trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) (Chevrolet)  or Trim Pad Replacement - Instrument Panel (I/P) (Pontiac) .
  3. Remove the screws (1) from the I/P cluster trim panel (3).
    Fig 1: Removing I/P Cluster Trim Panel Screws (Chevrolet)
    GM874860Courtesy of GENERAL MOTORS CORP.
  4. Remove the I/P cluster trim panel (3). Pull rearward in order to disengage the retainers (2).
  5. Disconnect the electrical connectors for the headlamp dimmer switch.
  6. Disconnect the electrical connector for the cigar lighter, if equipped.