LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) (Pontiac) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
  2. With a flat-bladed tool, remove the defroster grille from the instrument panel (I/P) trim pad. Refer to Defroster Grille Replacement (Chevrolet)  or Defroster Grille Replacement (Pontiac) .
  3. Remove the I/P upper trim panel (4) by lifting upward to release the retainers.
    4. Fig 1: Removing I/P Upper Trim Panel (Pontiac)
    GM834451Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws from the I/P outer trim cover.
  5. Remove the I/P outer trim covers.
  6. Remove the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Pontiac)  or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Chevrolet) .
  7. Remove the screws (1) from the right I/P trim panel.
  8. Remove the right I/P trim panel (3).
  9. Remove the screws (1) attaching the I/P trim pad (2).
  10. Remove the I/P trim pad (2) from the I/P carrier.
scientia non olet · About LEMON Manuals