Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel (IP) trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) (Chevrolet) or Trim Pad Replacement - Instrument Panel (I/P) (Pontiac)
- Remove the screws (1, 3) from the top of the IP cluster (2).
- Remove the IP cluster (2) pulling rearward.
- Disconnect the electrical connector (5) from the IP cluster (2).
- Remove the IP cluster (2) from IP carrier.