LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement (Pontiac) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector (5) to the IP cluster (2).
    Fig 1: Connecting (I/P) Cluster Electrical Connector (Pontiac)
    GM288303Courtesy of GENERAL MOTORS CORP.
  2. Position the IP cluster retainer tabs (4) into the IP carrier.
  3. Install the IP cluster (2) to the IP carrier.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the IP cluster screws (1, 3).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Install the IP trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) (Chevrolet)  or Trim Pad Replacement - Instrument Panel (I/P) (Pontiac) .
scientia non olet · About LEMON Manuals