LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement (Chevrolet) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector (1) to the I/P cluster (5).
    Fig 1: Connecting (I/P) Cluster Electrical Connector (Chevrolet)
    GM288305Courtesy of GENERAL MOTORS CORP.
  2. Position the I/P cluster retainer tabs (4) into the I/P (3).
  3. Install the instrument panel cluster (5) to the I/P (3).
  4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the I/P cluster screws (6).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  6. Install the I/P cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) .