Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Position the right I/P trim panel (3) to the I/P (2).
- Install the right I/P trim screws (1).
Tighten: Tighten the screws to 2.3 N.m (20 lb in).
- Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Pontiac) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Chevrolet) .
- Close the I/P compartment door.
NOTE:
Refer toFastener Notice
in Cautions and Notices.