LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Steering Wheel & Steering Column) >> Repair Instructions >> Turn Signal Cancel Cam and Upper Bearing Thrust Washer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement (Coil) in SIR.
  3. Remove and discard the bearing retainer using J 23653-SIR and J 42137  .
    Fig 1: Compressing Cam Orientation Plate Using J 23653-SIR & J 42137
    GM338052Courtesy of GENERAL MOTORS CORP.
  4. Remove the shaft lock (1).
  5. Remove the turn signal cancel cam (2).
  6. Remove the upper bearing spring (3).
  7. Remove the upper bearing inner race (4).
    Fig 2: Exploded View Of Turn Signal Cancel Cam
    GM372230Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals