LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Column Upper Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the lock cylinder. Refer to Ignition Lock Cylinder Replacement (Without Key)  or Ignition Lock Cylinder Replacement (With Key) .
  3. Remove the steering column tilt head housing. Refer to Steering Column Tilt Head Housing Replacement .
  4. Remove the 2 tapping screws (1).
    Fig 1: Exploded View Of Ignition Lock Actuator Assembly
    GM372981Courtesy of GENERAL MOTORS CORP.
  5. Remove the lock bolt support bracket (2).
  6. Remove the lock bolt assembly (3).
  7. Remove the ignition lock actuator assembly (4).
scientia non olet · About LEMON Manuals