LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Steering Wheel & Steering Column) >> Repair Instructions >> Ignition Lock Cylinder Replacement (With Key) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector (3) to the ignition lock cylinder (1).
    Fig 1: View Of Ignition Lock Cylinder
    GM491353Courtesy of GENERAL MOTORS CORP.
  2. Insert the ignition lock cylinder into the housing assembly (1) while rotating the key approximately 5 degrees counterclockwise.
    Fig 2: Identifying Ignition Lock Cylinder Housing Assembly Locking Button
    GM491355Courtesy of GENERAL MOTORS CORP.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  5. Connect the negative battery cable.
  6. Perform the Passlock Learn Procedure. Refer to Programming Theft Deterrent System Components in Theft Deterrent.
scientia non olet · About LEMON Manuals