LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Controls - 2.2L (L61) Introduction) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Use the new MAP sensor seal provided with the new MAP sensor.
  1. Install the MAP sensor (2) into the intake manifold.
    Fig 1: Exploded View Of Throttle Body
    GM782280Courtesy of GENERAL MOTORS CORP.
  2. Connect the MAP sensor harness connector.
  3. Install the accelerator cable bracket. Refer to Accelerator Controls Cable Bracket Replacement .
  4. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .