LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Controls - 2.2L (L61) Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine (Purge Pipe) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the engine purge pipe to the EVAP canister purge valve and the chassis purge pipe.
  2. Connect the engine purge pipe to the chassis purge pipe.
  3. Connect the engine purge pipe to the EVAP chassis purge valve.
    Fig 1: Identifying Evaporative Emission (EVAP) Hoses/Pipes
    GM783172Courtesy of GENERAL MOTORS CORP.
  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals