Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air cleaner resonator to the throttle body.
- Connect the vent hose to the air cleaner resonator.
- Move the spring clamp over the air cleaner resonator vent port and vent hose.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Tighten the resonator to throttle body clamp.
Tighten: Tighten the clamp to 5 N.m (44 lb in).
- Connect the IAT sensor harness connector.
- Connect the vacuum pipe to the air cleaner resonator.
- Connect the air cleaner intake duct to the air cleaner resonator.
Tighten: Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).