Clutch Pedal Cruise Control Release Switch Adjustment

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Ensure that the cruise control release switch is fully seated in the bracket.

Fig 1: Adjusting Cruise Control Release Switch
Courtesy of GENERAL MOTORS CORP.
Slowly pull the brake pedal rearward until the audible clicking is no longer heard.
The switch will be moved in the retainer providing adjustment.
Release the brake pedal.
Ensure that the following contacts open at 25.4 mm (1 in) or less of pedal travel:
1. The release switch (1)
2. The stoplamp and torque converter clutch (TCC) switch.
  
  Fig 2: Measuring Release Switch Contacts
  Courtesy of GENERAL MOTORS CORP.
Ensure the switches open simultaneously or before the onset of braking.
The brake pedal may travel up to 25.4 mm (1 in) before the cruise control system disengages.