Conditions for Setting the DTC
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- DTC B0040 will set when the side impact module-LF deployment loop resistance is less than 1.3 ohms for 300 milliseconds.
- DTC B0041 will set when one of the following conditions occurs:
- Side impact module-LF high circuit is less than 2 volts and the side impact module-LF deployment loop is more than 6 ohms for 300 milliseconds.
- Side impact module-LF deployment loop resistance is more than 6 ohms for 300 milliseconds.
- DTC B0045 will set when one of the following conditions occur:
- Side impact module-LF high circuit is more than 6 volts for 300 milliseconds.
- Side impact module-LF high circuit is less than 2 volts and side impact module-LF deployment loop resistance is less than 6 ohms for 300 milliseconds.