Removal & Installation (Sunfire)
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P carrier. See appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. Disconnect the temperature control cable from the temperature door lever. See Figure. Remove the cable clip retaining screw. Remove the HVAC control assembly.
- Remove the cable cover. Remove the cable clip from the HVAC control assembly. See Figure. Remove the temperature control cable.
- To assemble, install the temperature control cable to the HVAC control assembly. Lock the cable clip to the HVAC control assembly. Install the cable cover.
- Install the HVAC control assembly. Install the cable to the temperature door lever. Install the cable clip and screw to the HVAC module assembly. Install the I/P carrier. See appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT.