Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear speaker (3) to the rear speaker spacer (2).
- Install the rear speaker screws (1) to the rear speaker (3).
Tighten: Tighten the screws to 1.5 N.m (13 lb in).
- Connect the electrical connector (1) to the rear speaker (2).
- Position the rear speaker spacer tabs (3) to the slots in the rear shelf.
- Install the rear speaker (2) to the rear shelf by pressing into place until fully seated.
- Install the rear window panel trim. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
NOTE:
Refer to Fastener Notice in Cautions and Notices.