LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Replacement (Pontiac) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the hood close out filler panel. Refer to Hood Close Out Filler Replacement in Body Front End.
  3. Remove the park/turn signal bulb/socket by depressing the lock tab and rotating the bulb/socket counterclockwise.
    Fig 1: Removing Park/Turn Signal Bulb/Socket (Pontiac)
    GM836796Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolt that retains the park/turn signal lamp bracket to the upper tie bar.
  5. Remove the screw that retains the grille assembly to the fascia.
    Fig 2: Removing Park/Turn Lamp Housing Screw (Pontiac)
    GM836798Courtesy of GENERAL MOTORS CORP.

    Remove the park/turn lamp housing with the grille assembly from the vehicle.

  6. Drill out the rivet from the grille to the lamp assembly.
    Fig 3: Removing Lamp Assembly Rivet (Pontiac)
    GM1361881Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolts/screws that retain the grille assembly to the park/turn lamp assembly.
    Fig 4: Removing Park/Turn Lamp Retaining Bolts (Pontiac)
    GM840628Courtesy of GENERAL MOTORS CORP.
  8. Remove the bolts that retain the park/turn signal lamp assembly from the lamp.
scientia non olet · About LEMON Manuals