Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bulb to the socket.
- Install the bulb/socket to the side marker lamp (2).
- Install the side marker lamp (2) to the front and/or rear bumper fascia.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the screw (3) to the side marker lamp (2).
Tighten: Tighten the side marker lamp screw to 2 N.m (18 lb in).