Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Rotate the bulb/socket clockwise to install the bulb to the headlamp assembly.
- Connect the electrical connectors to the bulb/socket.
- Position the headlamp assembly to the body.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the bolts to the headlamp.
Tighten: Tighten the bolts to 4.5 N.m (40 lb in).
- Install the hood close out filler panel. Refer to Hood Close Out Filler Replacement in Body Front End.
- Close the hood.