Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Position the horn (1) into the slot in the front frame rail.
- Install the horn bracket bolt (3).
Tighten: Tighten the bolt (3) to 10 N.m (89 lb in).
- Connect the horn electrical connector (2).
- Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.